Trimline Hoods and Ventilators
Model TEV - For exhaust or gravity relief. Includes 1 to 1 ratio of hood perimeter opening to throat area. Maximum Design velocity of 1200 fpm.
Model TIV - For fresh air intake. Features a 2 to 1 ratio of hood perimeter opening to throat area. Design velocity at perimeter of 600 fpm to minimize moisture entertainment.

Performance
  • Low Silhouette design
  • Full 360o perimeter hood opening for more reliable air flow performance
  • Generously sized throat and hood perimeter for low resistance and more efficient air flow
Construction & Features
  • Base Constructed of .080" aluminum
  • Hood Constructed of .050" aluminum
  • All curb cap corners are miter cut and continuous welded for strength and water tightness
  • Hoods are reinforced and braced for extra rigidity and resistance to wind damage
  • All hoods are equipped with 1/2" x 1/2" mesh galvanized wire bird screen
    (omitted when equipped with filters)
Options
  • Hinged Hood - for easy access to backdraft dampers, filters and screens
  • Insulated Hood - reduces condensation drip - rubberized anti-condensation undercoating or 1" fiberglass insulation
  • Filters - 1" or 2" thick permanent aluminum mesh mounted for easy cleaning (add .13" to static pressure listed in the tables when using filters on TIV ventilators)
  • Insect Screens - 18 mesh aluminum screen attached to the full perimeter opening of the hood (add .10" to static pressure for TEV and .05" to static pressure for TIV when using Insect Screens)
  • Aluminum Bird Screens - .050" thick 1/2" x 1" diamond shape expanded aluminum attached to full perimeter of hood opening by spot welds or stainless steel fasteners
  • Decorative Coatings - Variety of colors of industrial grade enamels
  • Galvanized Steel Construction
  • 100 MPH Construction
Ptotective Coatings
  • Epoxy - a tough gray coating that is one of the best heavy duty multipurpose finishes resistant to most chemicals and corrosives
  • Eisenheiss - a synthetic resin that forms a tough coating offering better protection against most acids and corrosive agents
  • Heresite - a black phenolic coating that has good resistance to heat, solvents and concentrates of most acids except strong oxidizing agents (resistant to weak alkalis but not recommended for hydrofluoric acid or hypoclorite salts)
Special Sizes
  • Custom sized and optioned units are available - consult Acme Manufacturing for specific details and performance capabiliities